CJB30-630 11kV 12kV 15kV 24kV 25kV 25kv 33kV 35kV 36kV 40.5kV 630A Dead Break Screened Separable Tee Connector (Interface C) with Compression Lug(Front Tee)
CJB30-630 -36kV 630A Dead Break Screened Separable Front Tee Connector (Interface C2) CJB30-630 and CJBK30-630 are made
Basic Info
Model NO. | CJB30-630 |
Transport Package | Carton Box |
Trademark | GCA |
Origin | China |
HS Code | 8546900000 |
Production Capacity | 1000000PCS/Year |
Product Description
CJB30-630 -36kV 630A Dead Break Screened Separable Front Tee Connector (Interface C2)
CJB30-630 and CJBK30-630 are made of silicone rubber, suit for connecting with type C1 bushing as described by CENELEC EN 50180, 50181 and DIN 47636.The screened separable tee connector CJB30-630 is designed to connect the polymeric cable to transformers, switchgears and other equipment.The screened separable connector CJBK30-630 is application for dual cable arrangement, designed to be used with CJB30-630 screened separable tee connectors.
Features
• Rated current 630A, for max. operating voltage up to 24kV. • The thick outer screen layer provides a total safe to touch screen which ensures safety for personnel. • The screen break design enables cable outer sheath testing without removing or dismantling the connector. • Electrical specification according to standard of IEC 60502-4, CENELEC HD 629.1 S2. Each separable connector is tested for AC withstand and partial discharge prior to leaving the factory. • The overall and cut back dimensions are designed for use of minimum space required in the termination box, even double connections fit within most standard boxes. • Suitable for both indoor and outdoor installations. Both single-core or three-core (with installed trifurcation kit) are available Design
- Type C1 bushing
- Stud + nut + washers
- Insulating back plug (with test point is available)
- Cable lug (compression and mechenical type are available)
- Inner screen layer
- Insulation layer
- Outer screen layer
- Stress cone
- Earthing wire
- Cable core
- B type connecting rod
Kit reference | Suit for diameter over XLPE insulation | Conductor size (36kV) |
CJB30-630-1#, CJBK30-630-1# | 23-28 mm | 35-70 sq.mm |
CJB30-630-2#, CJBK30-630-2# | 28-36 mm | 95-185 sq.mm |
CJB30-630-3#, CJBK30-630-3# | 36-40 mm | 240-300 sq.mm |
CJB30-630-4#, CJBK30-630-4# | 40-45 mm | 400-500 sq.mm |
CJB30-630-5#, CJBK30-630-5# | 44-49 mm | 630 sq.mm |
Technical data
Test Item | Test value |
AC voltage withstand | 81kV, 5min |
AC voltage withstand | 45kV, 15min |
Partial discharge | 30kV, ≤10pC |
Heating cycles voltage test | 30 cycles in air, 30 cycles under water at 95-100°C, 45kV |
Thundering impulse voltage withstand | 170kV at 10 positive and 10 negative |
Screen resistance | Not exceed 5000Ω |
Screen leakage current | Maximum 0.5mA at 36kV |
Thermal short-circuit test | No visible deterioration at 31kA, 2s |
Dynamic short-circuit test | No visible deterioration at 112kA, 10ms |
Applications
Send to us